APEX TITANIUM HYD HVI 100 range of lubricants are high viscosity index an-wear hydraulic fluids formulated efficiently in hydraulic & fluid power transmission systems, subjected to wide temperature ranges with high-quality HVI base stocks and advanced an-wear additive technology. They are designed to work operating under severe conditions. These oils are available in ISO viscosity grades from 15 to 150.
APEX TITANIUM HYD HVI 100
APEX TITANIUM HYD HVI 100 range of lubricants are high viscosity index an-wear hydraulic fluids formulated efficiently in hydraulic & fluid power transmission systems, subjected to wide temperature ranges with high-quality HVI base stocks and advanced an-wear additive technology. They are designed to work operating under severe conditions. These oils are available in ISO viscosity grades from 15 to 150.
Features & Benefits
• Very high viscosity index and excellent shear stability, ensures long pump life under extreme conditions.
• Outstanding thermal & oxidation stability helps in extending the life of oil and filter.
• Outstanding demulsibility aids in rapid water separation and provides excellent hydrolytic stability.
• Excellent an-wear property of oil provides maximum equipment life, under severe duty & high loads.
• Outstanding demulsibility aids in rapid water separation and provides excellent hydrolytic stability.
• Excellent an-wear property of oil provides maximum equipment life, under severe duty & high loads.
• Excellent protection from rust and corrosion of mul-metallurgy system components.
• Good an-foam and air release characteristics, designed by using silicon-free additive components.
Specificaons
APEX TITANIUM HYD HVI 100 series meets or exceeds following international and Builder specifications:
• DIN 51524 Part 3 HVLP type
• ISO 6743/4 HV
• Denison HF-0, HF-2 (T6H20C)
• Denison HF-0, HF-2 (T6H20C)
• VICKERS M-2950S, -I-286
• Cincinnati Machine P68, P69, P70
• VICKERS 35VQ25, 104C
Typical Characteristics
| Apex Titan HYD HVI | Test Method | Units | 15 | 22 | 32 | 46 | 68 | 100 | 150 |
| ISO Viscosity Grade | ISO 3448 | – | 15 | 22 | 32 | 46 | 68 | 100 | 150 |
| Density @ 15 °C | ASTM D 4052 | gm/cc | 0.845 | 0.864 | 0.870 | 0.878 | 0.880 | 0.887 | 0.894 |
| Viscosity @ 40 °C | ASTM D 445 | cSt | 15.6 | 22.9 | 32.4 | 46.8 | 68.9 | 100.8 | 150.2 |
| Viscosity @ 100 °C | ASTM D 445 | cSt | 3.99 | 5.12 | 6.46 | 8.41 | 11.27 | 13.21 | 16.85 |
| Viscosity Index | ASTM D 2270 | – | 161 | 160 | 156 | 156 | 156 | 128 | 120 |
| Pour Point | ASTM D 97 | °C | -39 | -39 | -36 | -36 | -36 | -33 | -33 |
| Flash Point (COQ) | ASTM D 92 | °C | 174 | 204 | 224 | 230 | 234 | 246 | 252 |
| Copper Strip Corrosion | ASTM D 130 | 1A | 1A | 1A | 1A | 1A | 1A | 1A | 1A |
| Rust Characteristics Proc B | ASTM D 665 | Pass | Pass | Pass | Pass | Pass | Pass | Pass | Pass |
| Foam Seq 1,11,111 | ASTM D 892 | ml/ml | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 | 20/0 |
| Demulsibility, 40/40/0 | ASTM D 1401 | min | 10 | 10 | 15 | 20 | 20 | 25 | 30 |
| TAN, mg KOH/g | ASTM D 2896 | – | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 |
Applicaon
These HVI oils are designed for use in Hydraulic applications subjected to wide temperature variations.
• Suitable for use in the hydraulics of Marine, Industrial & Earthmoving; where temperatures vary seasonally.
• Applications where HVI an-wear lubricant is required: servicing gears & bearings, air compressors, etc.,
Quantity
- 1L
- 4L
- 5L
- 20L
- 25L
- 208L
Reviews
There are no reviews yet.